Do I need the RS-232 communication?
You can use high-level RS-232 communication without using a PC to enable autonomous data exchange between embedded components; this approach removes the dependency on operating systems.
Unstable communication when using multiple GANG programmers in a chain
Step 1: Verify that all channels in all programmer units have the same DLL/Command Line Support (-D) setting. It must be “Yes for all” or “No for all” — mixing is not allowed. (Other options do not affect communication.)Check this via Options → OEM → Summary of Options/Families… Step 2: Confirm that all programmer units […]
No communication with ICP2-GANG(G3) from ICP for Windows
(A) Validate that all programmer channels are powered – Remove power- Apply 12V and observe: – all GREEN and RED LEDs should turn on for about 1-2sec – blue POWER LED should be always ON If (A])is OK then continue to (B) below (B) Sometimes incorrect box number is assigned (2…16 instead of default Box=1) […]
