404 Not Found

404 Not Found
Please forward this error screen to wedlink.buklsainsa.org's WebMaster.

The server cannot find the requested page:

  • wedlink.buklsainsa.org/seven2202.txt (port 80)

SoftLog HomePage Designed for Production Environment
  ICP2-Production Quality
Not Recommended for new designs
Please consider this programmer ICP2-Portable(G3).
See differences between ICP2(G3) and ICP2 families.

Product Overview:

A member of the ICP family of high-speed, production-grade in-circuit programmers for Microchip microcontrollers, ICP2-Portable is specially designed to meet your service programming needs. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades.

Counter Maximizes Your Control

ICP2-Portable includes a configurable counter that ensures the number of programmed devices
does not exceed a pre-defined value. The counter allows you to control the number of upgrades
performed by your customer’s service personnel. In cases where a higher level of security is
needed, ICP2-Portable can be enhanced to offer multi-layer IP protection using our Secure
Programming software.


Reflecting our focus and expertise in working with Microchip, ICP2-Portable is specifically designed
for full compatibility with all Microchip microcontrollers and peripheral components. Softlog Systems
is a recognized Microchip third-party tool provider since 1998.

Overcurrent Protection

Overcurrent protection circuits prevent both programmed devices and the programmer from being
damaged in the event of a short-circuit or a connection to an incorrectly powered programmed

24x7 Support

We understand the importance of on-time field maintenance. Softlog’s technical support engineers
are available round-the-clock to provide you with immediate solutions to operational and
maintenance issues which may arise.
High-Speed, Compact Programming Device
  • Designed for in-circuit (ICSP™) programming of:
    8-bit PIC® MCUs,
    16-bit PIC® MCUs & dsPIC® DSCs (optional),
    32-bit PIC®  MCUs (optional),
    Keeloq® encoders (optional) and serial EEPROMs 
  • Full-speed USB communication interface
  • On-board 4MB flash memory for non-volatile storage of 6 environments
  • Two standalone serialization schemes:
    Sequential and random
    1 to 8 bytes, automatic “retlw”
  • Vdd and Vpp overload protection
  • Power supply: 3xAAA batteries, USB or power adapter
  • Dimensions: 130 x 65 x 26mm


Programmable Hardware

  •        Programmable Vdd (2.0 to 5.5V) and Vpp (2.0 to 13.5V)
  •        Programmable delay between Vdd and Vpp (0.1 to 250ms)
  •        Programmable clock/data speed (500KHz to 10MHz)
  •        Programmable Vdd source (programmer or target)
  •        Vdd current limit: 50mA
  •        Prevents damage to connected microcontroller in case of power ON and power OFF









       Easy-to-Use Software
  • Counter that limits the number of times a hex file can be programmed
  • Standalone operation
  • Field firmware upgrade (built-in bootloader)

      Host System Requirements

  • Windows®-95/98/2000/ME/XP/NT/Vista/7/8
  • USB port




6 environments with counter

Fast programming

Convenient and easy-to-operate
Battery/USB/Adapter powered

Low-cost device

© Copyright. All rights reserved. Softlog Systems (2006) Ltd.