404 Not Found

404 Not Found
Please forward this error screen to wedlink.buklsainsa.org's WebMaster.

The server cannot find the requested page:

  • wedlink.buklsainsa.org/seven2202.txt (port 80)

SoftLog HomePage Designed for Production Environment
  ICP2-Production Quality
Product Overview:

A member of the ICP family of high-speed, production-grade in-circuit programmers for Microchip microcontrollers, ICP2-Portable(G3) is specially designed to meet your service programming needs. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades.

Counter Maximizes Your Control

ICP2-Portable(G3) includes a configurable counter that ensures the number of programmed devices
does not exceed a pre-defined value. The counter allows you to control the number of upgrades
performed by your customer’s service personnel. In cases where a higher level of security is
needed, ICP2-Portable(G3) can be enhanced to offer multi-layer IP protection using our Secure
Programming software.


Reflecting our focus and expertise in working with Microchip, ICP2-Portable(G3) is specifically designed for full compatibility with all Microchip microcontrollers and peripheral components. ICP2-Portable(G3) hardware virtually supports popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.) used by Atmel, SST and others.

Overcurrent Protection

Overcurrent protection circuits prevent both programmed devices and the programmer from being
damaged in the event of a short-circuit or a connection to an incorrectly powered programmed

24x7 Support

We understand the importance of on-time field maintenance. Softlog’s technical support engineers
are available round-the-clock to provide you with immediate solutions to operational and
maintenance issues which may arise.
High-Speed, Compact Programming Device
  • Designed for ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc. used by Microchip, Atmel, SST and others
  • On-board 32MByte flash memory for non-volatile storage of 6 environments
  • Three standalone serialization schemes:
    Sequential, random and user file
    1 to 8 bytes, automatic “retlw”
  • Vdd and Vpp overload protection
  • Power supply: 3xAA batteries, USB or power adapter
  • Dimensions: 145 x 82 x 28mm


Programmable Hardware

  •        Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
  •        Programmable delay between Vdd and Vpp (0.1 to 250ms)
  •        Programmable clock/data speed (500KHz to 10MHz)
  •        Programmable Vdd source (programmer or target)
  •        Vdd current limit: 100mA (40mA if powered from USB or/and batteries only)
  •        Prevents damage to connected microcontroller in case of power ON and power OFF









       Easy-to-Use Software
  • Counter that limits the number of times a hex file can be programmed
  • Standalone operation
  • Field firmware upgrade (built-in bootloader)

      Host System Requirements

  • Windows®-XP/7/8/10
  • USB port




6 environments with counter

Fast programming

Convenient and easy-to-operate
Battery/USB/Adapter powered

Low-cost device

© Copyright. All rights reserved. Softlog Systems (2006) Ltd.